Quick Start
SYSTEM MENU
1:EXECUTE PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST
6:VERSION
7:FTP
8:RF
In the Set System menu, there are eight settings. Cursor down or press 5: Communication and press Enter.
SET SYSTEM
1:EXECUTE PROGRAM
2:DISPLAY
3:DATE /TIME
4:BARCODE
5:COMMUNCATION
6:KEY
7:RESUME
8:TCP/IP
There are four settings in the Set Communication menu. Select number 1: Optical and press Enter.
SET COMMUNICATION
1:OPTICAL
2:CONNECTOR
3:COM PORT
4:PROTOCOL TYPE
In the Optical menu, there are two settings, Parameter and Protocol. Choose the Protocol setting and press Enter.
SET COMMUNICATION
1:PARAMETER
2:PROTCOL
In the Set Protocol Menu, unlike the previous menus, all the settings will need to be entered. The Set Protocol fields and settings are found in the table below.
Press 1 for or move cursor to the <Serial No.> field and move cursor to <On>.
Press 2: <H. Parity> and move cursor to <On>.
Press 3: <Linkup Time> and move cursor to <30>.
Press 4: <Field Space> and move cursor to <Ignore>.
Supported Equipment Manual • March, 2006 |
