700tmOM 8/24/06 11:15 AM Page 20
Dot Matrix /
Profile display
Console Layout (continued)
Displays:
1.Dot Matrix /Profile display: It displays the program profile during the program run mode.
•For Classic programs, there are three profiles you can select: Speed pro file, Incline profile & Track profile. Press the “SELECT” key next to dot matrix window to switch the profile display from default profile to the selected profile and light up its LED indicator.
o Each column represents the segment time = Program time / 20 columns. If the program time is less than 20 minutes, then the segment time will be 1 minute instead.
o Speed profile - Each row of LED at dot matrix display represents 1.5mph increment.
o Incline profile - Each row of LED at dot matrix display represents 1.5% increment.
oTrack profile - In the track display, a graphical representation of a 1 mile track is displayed and progress around the track is marked per the distance accumulated. Each dot represents 1mi/32. See the representation below. Your progress will be shown with a flashing dot. Progress will start at the lower center and proceed counter clockwise. When it reaches 1mile, the dot track will be completed.
•For Heart Rate Interactive programs, dot matrix window will display %max HR profile display only. Other profile display will not be available with Heart Rate Interactive programs.
o Each row of LED at dot matrix display represents 10% of max HR.
18 | 700 Tm Owner’s Manual |
|
|
