SETUP AND CONNECTIONS
BACK OF THE TV
The diagram below describes each of the back panel jacks found on the TV. When connecting A/V cables, be sure to connect corresponding outputs and inputs (video to video, right audio to right audio, etc.).
PHONE JACK
AB
OPTICAL
DIGITAL
ANT( 75 )
TOP OF CARD
FACE DOWN
ACCESS CARD
AUDIO CENTER |
|
| OUT |
|
| ||
CHANNEL IN |
| R | L AUDIOVAR |
|
| ||
|
|
|
|
| |||
ON | OFF |
| Y |
| VIDEO | Y |
|
VIDEO |
|
|
| ||||
|
|
|
|
|
|
| |
|
| L/ | PB | L | L/ | PB | L |
|
| MONO | |||||
|
| MONO |
|
|
|
|
|
|
| AUDIO | PR | AUDIO | AUDIO | PR | AUDIO |
|
| R |
| R |
|
|
|
|
|
|
| R |
| R | |
|
| COLOR |
|
| COLOR |
| |
|
| STREAM |
|
| STREAM |
| |
|
|
| HD 1 |
| OUT | HD 2 |
|
|
| IN | IN |
| IN |
|
SATELLITE IN Use to connect the satellite dish antenna to the TV.
ACCESS CARD INTERFACE Insert the access card into the slot so your program provider can identify you. Make sure the contacts on the access card are on the top of the card while inserting. (Refer to “New Access Card” in this manual’s “Assistance” section on page 84 for details.) The DIRECTV PLUS™ System requires a valid card.
PHONE JACK Use to connect a phone line to the TV. The DIRECTV PLUS™ system requires a phone line connection to periodically call out to program providers.
DIGITAL AUDIO OUT Use a digital optical cable (or SPDIF cable) to connect your TV to a compatible Dolby Digital receiver or decoder. Dolby Digital offers
ANTENNA A IN Use to connect an
ANTENNA B IN Use to connect a second
You can also use the ANT A IN (or ANT B IN) for video games and switch between the two inputs using the ANTENNA button on the remote control. When using TV games, computers, and similar products with your TV, keep the contrast at a low setting. If a fixed
14