BASIC TV OPERATION
Basic POP Operation
1.Press the POP button on the remote control. The POP window appears on the screen.
2.Press the POP CH yz buttons to select the desired program for the window picture.
3.To remove the POP window, press the POP button again.
POP Problems?
•If you are channel surfing and the POP disappears, you may have tuned to a digital channel. To view POP and the main picture, make sure that both the main and POP channels are analog inputs, or signals. Continue changing the channel until you find an analog (NTSC format) channel. The POP window will reappear.
Direct Ticket Previews
8:00 PM to 8:00 PM |
| 4:3 Full | ||||||||||||
| Sat 01/01/00 8:10PM | |||||||||||||
English(Stereo) |
|
|
|
|
|
|
| Family | ||||||
Ch 100 DTV |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POP Not Viewable | Menu |
| TV | SAT |
|
|
|
|
|
|
|
|
|
|
The message “POP Not Viewable” in the channel banner lets you know that POP is not available on this channel and you should tune to another channel.
•If you press POP and the POP box is grayed, you may have movie or TV rating limits set. These limits may block your access to the POP channel. For information on removing limits, see the section “Using the Profiles.”
•If the POP window disappears when closed captioning is displayed or you press the MUTE button on the remote control, you have a conflict in your settings. You cannot view POP when parental controls have blocked the current program or closed captioning is displayed. In order to view POP, either unlock parental controls or change the closed captioning setting.
The channel banner and the message “POP Not Viewable” will disappear after a few seconds, you can refer to the POP message by pressing the INFO button on the remote control
37
