External Hard Drive Addendum
11
Recording Future Programs
You can override a specific timer's priority with a one-time skip or by restoring it.
Select a timer in the Daily Schedule, then you'll have an option to Skip or Restore for
that timer (see page14).
Timer Option s
The Timer Options screen lets you set the following (not used on all options screens):
Protect Event—Prevents your programs from being erased when your external hard
drive fills up.
Set Resolution—Set the timer to record only HD or SD programs.
Note: When setting DishPASS timers for programs available in both HD and SD, by
default, the receiver automatically selects the HD program for recording.
Set Frequency—Select this option if you want to record only new episodes of a
program. By default, all episodes of a DishPASS event will be recorded.
Set Channel—Select a specific channel. When setting manual timers, you select a
channel from a scrolling list of all channels in your guide.
•Start Early—Select this option if you want to begin recording a few minutes early.
End Late—Select this option if you want to continue recording after the scheduled
program ending time.
Set as System Default—Select this option if you want to use the Start Early and End
Late settings for this event as the new defaults for future timers.
Maximum Recorded Events—Select this option if you want to automatically delete
the oldest unprotected recordings after a specified number are accumulated for this
particular timer. This option is particularly valuable for certain DishPASS timers, which
might otherwise fill up your external hard drive with too many episodes of a program.
Timers List
Use the Timers List as described on page14 to:
View the general list of timers.
Select a timer from this list to see a detailed list with specific dates and times of
upcoming timers for that program or DishPASS search term(s).
Set user-selected priorities for each timer. See Timer Priorities on page10.
Create a Manual timer.
Create a DishPASS timer.
Select Edit List to edit a timer.