Dish Network 411 manual

75

Select Done.

6

Note: Usually, you need a telephone number prefix only for business installations. For most residential installations, all you need to do is set the telephone system type. The default setting of No Prefix will allow correct dialing.

4 If you selected No Prefix, select Done.

5 If you selected Prefix Code, the receiver highlights the box where you must enter the exact sequence you dial the phone to obtain an outside line.

Select the Touch Tone or the Rotary Phone option in the Phone Type list.

Select either the No Prefix or the Prefix Code option in the Outside Line Prefix list.

2

3

Connections and Setup

Connecting the Phone Line

Phone Line Connection

Run a telephone cable with a standard RJ-11 connector from the receiver’s back panel Phone Jack to an active telephone connection.

Phone System Setup

You must also set up the receiver for your telephone system (touch tone or rotary), and set a telephone number prefix, if you need a prefix to make an outside call.

1 Pressing MENU, then select System Setup (6), Installation (1), and then Phone System (4).

1 1

2 2

3 3

4 4

5 5

6 6

7 7

8 8

9 9

10 10

11

R R