Connections and Setup
71
Connecting to a TV
1
2
3
4
5
6
7
8
9
10
11
R
1
2
3
4
5
6
7
8
9
10
R
YPBPR Connections
The YPbPr connections provide high-quality audio and video to your HDTV or HD monitor.
1Connect between the YPbPr component connections on the receiver and the HDTV using
component video cables.
2Connect audio (red and white) RCA-type cables between the receiver Audio Outputs and
audio input connections that go with the YPbPr connectors on your HDTV or monitor.
3If you do not see a picture, change the resolution setting on the receiver.
4Turn up the volume on your HDTV and confirm you have sound. Check the RCA-type
connections if you don’t have sound.
No Picture on the HDTV
This section will help you make a picture on the HDTV in the event that you could not do
so in the previous sections.
1Connect RCA-type cable connections between the receiver Out and the HDTV.
2Make sure the receiver and HDTV are on.
3Make sure the HDTV is set to display satellite TV. Look on the back of your HDTV and
consult your HDTV user’s guide.
4On the receiver front panel, press SYS INFO.
5Change the HDTV settings as described on page72.
6Switch to the HDTV to display satellite TV. If you have a picture, you are finished.
7Repeat steps 5 and 6 until the HDTV displays video from the receiver.