Eaton Electrical 1000 Assigning IP Addresses (DHCP Disabled)

GETTING STARTED
EATON PowerXpert®Gateway Series 1000 Card User’s Guide S164201670 Rev 1 11
Assigning IP Addresses (DHCP Disabled)
NOTE Youcan also set network settings via the PXGX Series 1000 Card’s Web page
Networklink (see “Network Configuration” on page16).
To manually enter fixed IP addresses for the card after you have
connected it:
1. Type 1and press Enter on the Network Settings menu (see
Figure 10) to display the Network Settings: Ethernet Port 1 menu
(see Figure 11).
---------------------------------------------------------
----------------Network Settings ----------------
---------------------------------------------------------
1.Ethernet Port 1 Settings
2.Ethernet Port 2 Settings
3.DNS Server (Primary) : [None]
4.DNS Server (Secondary) : [None]
5.Reset to Factory Defaults and Exit
0.Exit
Selectan option ==> 1
Figure10. Network Settings Menu
---------------------------------------------------------
------Network Settings: Ethernet Port 1 ------
---------------------------------------------------------
1.Dynamic Addressing (DHCP) Enabled
2.IP Address [None]
3.Subnet Mask [None]
4.Default Gateway [None]
MACAddress 00:60:26:10:89:A8
LinkStatus Enabled
0.Exit to previous menu
Selectan option ==>
Figure11. Ethernet Port 1 Menu
2. Type 1and press Enter to display the DHCP control option (see
Figure 12).