Eaton Electrical 1000 - page 17

GETTING STARTED
EATON PowerXpert®Gateway Series 1000 Card User’s Guide S164201670 Rev 1 13
9. Type 2and press Enter on the Network Settings menu (see
Figure 10 on page 11) to display the Network Settings: Ethernet
Port 2 menu (see Figure 14).
----------------------------------------------------------
------Network Settings: Ethernet Port 2 ------
----------------------------------------------------------
1.Dynamic Addressing (DHCP) Enabled
2.IP Address [None]
3.Subnet Mask [None]
4.Default Gateway [None]
MACAddress 00:60:26:10:89:A8
LinkStatus Enabled
0.Exit to previous menu
Selectan option ==>
Figure14. Ethernet Port 2 Menu
10. Repeat Steps 2 through 7 to assign the IP address and other
options for Port 2.
11. If you will be using host names for controlling access to the card,
type 3and press Enter. Type the primary DNS server IP address and
press Enter.
Type 4and press Enter. Type the secondary DNS server IP address
and press Enter (see Figure 15).
---------------------------------------------------------
----------------Network Settings ----------------
---------------------------------------------------------
1.Ethernet Port 1 Settings
2.Ethernet Port 2 Settings
3.DNS Server (Primary) : 10.222.51.8
4.DNS Server (Secondary) : [None]
5.Reset to Factory Defaults and Exit
6.Save & apply all settings
0.Exit without saving
Selectan option ==> 4
Figure15. DNS Server Settings