GETTING STARTED
EATON PowerXpert®Gateway Series 1000 Card User’s Guide S164201670 Rev 1 5
Connecting the Card
To connect the card to the computer and start the configuration:
1. Plug the RJ-45 end of the supplied configuration cable into the
configuration port on the card labeled “10101” (see Figure 4).
NOTE Verifythat you have used the port labeled “10101.” The other ports on the card do
notwork for configuration.
Figure4. Install Configuration Cable
2. Plug the other end of the serial cable into the serial COM port on
the computer.
3. Open your terminal emulation program (such as HyperTerminal).