Eaton Electrical 1000 Chapter 1 Getting Started

EATON PowerXpert®Gateway Series 1000 Card User’s Guide S164201670 Rev 1 1

Chapter 1 Getting Started

NOTE Ifyou have completed all sections in the Power Xpert Gateway Series 1000 Card

QuickStart Instructions, proceed to Chapter 2, “Configuring the Card,” on page 19.

This section explains:

SChecklist items needed for installation

SInstalling the card

SConnecting the card

SVerifying or assigning the IP address

SConfiguring the network settings

Installation Checklist

1. Verify that all of the following items are available:

-Eaton®Power Xpert Gateway (PXGX) Series 1000 Card package

contents (card, configuration cable, Ethernet cable, and quick

start instructions)

-Phillips screwdriver

-Available serial port (RS-232)

-HyperTerminalR(ships with Microsoft®Windows®) or equivalent

terminal emulation application

-Web browser (Internet Explorer or Mozilla®Firefox®

recommended)

Contents

Main Class A EMC Statements FCC Part 15 NOTE Requesting a Declaration of Conformity Table of Contents 1 Getting Started 1....................................................... 2 Configuring the Card 19.................................................. 3 Root Certificate Authority Installation 31..................................... 4 MIB Files 45........................................................... 5 Modbus Registers 49.................................................... 8 Service and Support 75.................................................. Chapter 1 Getting Started S S S S S Installation Checklist Page Installing the Card Page Connecting the Card Page S IP Address Assignments Verifying IP Addresses (DHCP Enabled) Page Assigning IP Addresses (DHCP Disabled) Page Page Figure16. Save and Apply All Settings Page Network Configuration Page Page Chapter 2 Configuring the Card Changing the Passwords Setting the Date and Time S S S Configuring SNMP Options S S S S Community Strings and Trap Recipients Restricting SNMP Access System Location and System Contact Management from an SNMP NMS Configuring Modbus TCP/IP Options Configuring E-mail Notification Page Configuring EMP Settings Configuring Auto Discovery Settings Page Chapter 3 Root Certificate Authority Installation Installing Root CA with Microsoft Internet Explorer 6 Page Page Page Page Page Page Page Installing Root CA with Microsoft Internet Explorer 7 Page Installing Root CA with Mozilla Firefox Page Page Chapter 4 MIB Files Eaton PDU MIB S S S mainPDU S pduPanel Eaton EMP MIB Eaton Alarms+Traps MIB Eaton OID Assignments Entity MIB Files S Page Chapter 5 Modbus Registers S S S Modbus Register Addressing Modbus Function Codes Data Formats S Data Addressing PDU/RPP Unit ID Numbers Table2. PDU/RPP Unit IDNumbers (continued) PDU/RPP Registers and Alarms PDU/RPP Registers (FC 04) Page Table3. PDU/RPP Registers (FC04) (continued) PDU/RPP Alarms (FC 02) Table4. PDU/RPP Alarms (FC02) Table4. PDU/RPP Alarms (FC02) (continued) Panel Registers and Alarms Panel Summary Registers (FC 04) Page Table5. Panel Summary Registers (FC 04) (continued) Panel Alarms (FC 01 or 02) Breaker Data and Alarms S S S Breaker #1 Data Registers (FC 04) Table7. Breaker #1 Data Registers (FC04) (continued) Calculating Breaker Register Numbers Breaker Alarms (FC 01 or 02) Environmental Monitoring Probe (FC 03 or 04) Chapter 6 Specifications Table10. Technical Specifications Page Chapter 7 Operation and Maintenance S S S S Front-Panel Indicator Descriptions Table12. Stacked Indicator Descriptions DIP Switch Description DIP switch definitions for the PXGX Series 1000 Card are listed in Table 13. Table13. DIP Switch Definitions Generating Log Files Upgrading the Cards Firmware Chapter 8 Service and Support Two-Year Limited Warranty (US and Canada) Power Xpert Gateway (PXGX) Series 1000 and Series 2000 Cards WHAT THIS LIMITED WARRANTY DOES NOT COVER: PROCEDURES FOR REPAIR OR REPLACEMENT OF WARRANTED ITEMS: WHAT THIS LIMITED WARRANTY COVERS: