MIB FILES
EATON PowerXpert®Gateway Series 1000 Card User’s Guide S164201670 Rev 1 47
Eaton EMP MIB
Objects in this group are provided by the EMP and include temperature
and humidity readings, alarming limits, the two contacts readings, and
setup information. The group contains a table of values for
environmental contact sensing (normally two digital inputs for
monitoring all contacts).
Traps are sent in response to EMP changes to indicate the type of
alarm, alarm acknowledgement, and alarm clearing.
Eaton Alarms+Traps MIB
Objects in this group provide a table of active alarms and a count of
alarms currently active. The notification traps provided are triggered by
the publishing of an alarm or event.
Eaton OID Assignments
These objects document all the object identifier assignments for Eaton
products.
Entity MIB Files
The objects in these MIB files provide information standard in the
industry:
SThe RFC 4133 Entity MIB provides standard objects for identifying
and describing devices attached to the card.
SThe RFC 4268 Entity State MIB provides availability status measures
for each device.
SThe RFC 4268 Entity State MIB Part 2 provides possible state values
for the Entity State MIB.