Eiki EIP-5000 Specifications

Specifications

Product type	DLP® Projector
Model	EIP-5000/EIP-5000L
Video system	NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
	DTV480I/DTV480P/DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I
Display device	0.7" DLP® chip ⋅ 1
	No. of dots: 786,432 dots (1,024 [H] ⋅ 768 [V])
Standard zoom lens	1.2 ⋅ electric zoom/focus lens, F1.8–F2.0, f = 25.6–31.3 mm (standard equipment with EIP-5000)
Projection lamp	260 W ⋅ 2
Component input (INPUT 1)/	15-pin mini D-sub connector
output (OUTPUT) signal	Y: 1.0 Vp-p, sync negative, 75 Ω terminated
	PB: 0.7 Vp-p, 75 Ω terminated
Horizontal resolution	PR: 0.7 Vp-p, 75 Ω terminated
	750 TV lines (DTV720P)
Component input (INPUT 2)	BNC connector
signal	Y: 1.0 Vp-p, sync negative, 75 Ω terminated
	PB: 0.7 Vp-p, 75 Ω terminated
RGB input (INPUT 1/2)/output	PR: 0.7 Vp-p, 75 Ω terminated
	15-pin mini D-sub connector, 5 BNC connector: RGB separate/composite sync (TTL)/sync
(OUTPUT) signal	on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
	Horizontal sync. signal: TTL level (positive/negative) or composite sync (Apple only)
RGB digital input signal (INPUT 3)	Vertical sync. signal: Same as above
	DVI connector (24-pin), RGB (digital), 250 –1,000 mV, 50 Ω (Compatible with HDCP)
Video input signal	RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
(INPUT 4)	terminated
S-video input signal	4-pin mini DIN connector
(INPUT 5)	Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

C(chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated

Audio input signal ø3.5 mm stereo minijack, RCA terminal

0.5Vrms, more than 22 kΩ

Audio output signal ø3.5 mm minijack

(AUDIO OUTPUT 1–5)	0.5 Vrms, less than 2.2 kΩ
RS-232C terminal	9-pin D-sub connector
LAN terminal	8-pin RJ-45 modular connector
Pixel clock	12–230 MHz
Vertical frequency	43–200 Hz
Horizontal frequency	15–126 kHz
Audio output	3.0 W (stereo)
Speaker system	3.3 cm round ⋅ 2
Rated voltage	AC 100–240 V
Input current	6.6 A (AC 100 V)–2.7 A (AC 240 V)
Rated frequency	50/60 Hz
Power consumption	650 W (when “Eco Mode” is “OFF”)/570 W (when “Eco Mode” is “ON”) with AC 100 V
	620 W (when “Eco Mode” is “OFF”)/550 W (when “Eco Mode” is “ON”) with AC 240 V
Power consumption (standby)	0.8 W (AC 100 V) – 1.1 W (AC 240 V) (When “Monitor Out” and “LAN/RS232C” are set to “Disable”.)
Heat dissipation	2,440 BTU/hour (when “Eco Mode” is “OFF”)/2,140 BTU/hour (when “Eco Mode” is “ON”)
	with AC 100 V
	2,330 BTU/hour (when “Eco Mode” is “OFF”)/2,070 BTU/hour (when “Eco Mode” is “ON”)
	with AC 240 V
Operating temperature	41°F to 104°F (+5°C to +40°C)
Storage temperature	–4°F to 140°F (–20°C to +60°C)
Cabinet	Plastic
I/R carrier frequency	38 kHz
Dimensions (approx.)	16 5/32" ⋅ 7 3/32" ⋅ 18 35/64" (410 (W) ⋅ 180 (H) ⋅ 471 (D) mm) (main body only)
	16 5/32" ⋅ 7 37/64" ⋅ 18 35/64" (410 (W) ⋅ 192.1 (H) ⋅ 471 (D) mm) (including adjustment foot
	and projecting parts)
Weight (approx.)	EIP-5000: 33.3 lbs (15.1 kg)
	EIP-5000L: 30.7 lbs (13.9 kg)
Replacement parts	Remote control, Power cord for U.S., Canada, etc., Power cord for Europe, except U.K.,
	RGB cable, Remote mouse receiver, Cap for the standard zoom lens, Technical reference
	CD-ROM, QUICK GUIDE, Owner’s manual

As a part of policy of continuous improvement, EIKI reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

104