Eiki EIP-5000 Displaying the Black Screen, Displaying and Setting the Break Timer, 1Press, 1 Press, 2 Pressing again will turn the projected image back on

Image Projection

Displaying the Black Screen

This function allows you to temporarily display the black screen.

1 Press .

2 Pressing again will turn the projected image back on.Displaying and Setting the Break Timer

This function allows you to show the remaining time for break during meeting.

1Press .2While “” is displayed, press ', ", \ or to set the break timer.

•You can set anywhere between 1 and 60 minutes (in 1 units).

•The break timer starts to count down as soon as ', ", \ or is pressed.

Note

•Pressing will cancel the break timer.

•Auto Power Off function will be temporarily disabled during the break timer.

When no input signal is detected for more than 15 minutes, the projector will automati- cally enter the standby mode if the break timer has elapsed.

•The break timer will be displayed on the startup image. To change the screen dis- played during the break timer, change the setting of “Startup Image” (see page 77).

•When “Slave” is set for “Stack Setting”, the break timer is not displayed. (See page 84.)

▼Projected Image

BREAK TIMER button

▼On-screen Display

BLACK SCREEN button

Mouse/ adjustment button ('/"/\/)

UNDO button

50