Eiki EIP-5000 Using the Remote Control as a Wireless Computer Mouse, 2 Slide the ADJ./MOUSE, 3Use the mouse function, switch on the remote con, ■When left-clicking Press

Using the Remote Control as a Wireless Computer Mouse

When connecting the supplied remote mouse receiver to the computer, you can use the remote control as the wireless computer mouse.

1 Connect the supplied remote mouse receiver to the USB terminal on the computer.

2 Slide the ADJ./MOUSE	ADJ.
switch on the remote con-
trol to the MOUSE position.	MOUSE

3Use the mouse function.

•Point the remote control at the remote mouse receiver.

■When moving the cursor Press '/"/\/.■When left-clicking Press .■When right-clicking Press .■When your computer supports only aone-click mouse (such as Macintosh®)

Press or . ( and have com- mon function.)

Note

•This function only works with the Microsoft® Windows® OS and Mac OS®. However, this function does not work with the following op- eration systems that do not support USB.

•Versions earlier than Windows® 95.

•Versions earlier than Windows® NT4.0.

•Versions earlier than Mac OS® 8.5.

•Confirm that the computer recognizes the USB connection.

•While the remote control is connected to the projector with a signal cable, you cannot use the wireless computer mouse function.

Supplied	Remote mouse
accessory	receiver
Computer	Remote mouse receiver

To USB terminal

ADJ./MOUSE switch

Mouse/adjustment button ('/"/\/)

R-click button

L-click button

19