Eiki EIP-5000 System Lock Function, Auto Power Off Function, Setting the keycode, 1Select “System Lock” on the “Op- tions (1)” menu, then press |

Auto Power Off Function

Menu operation Page 56

Example: “Options (1)” screen menu for INPUT 1 (RGB) mode

Description of Auto Power Off

Selectable items	Description
	The projector automatically enters the
ON	standby mode when no input signal is
	detected for 15 minutes or longer.
OFF	The “Auto Power Off” function will be
	disabled.

Note

•When “Auto Power Off” is set to “ON”, 5 min- utes before the projector enters the standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

System Lock Function

This function prevents unauthorized use of the pro- jector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only authorized users have access.

Info

•If you lose or forget your keycode, contact your nearest EIKI Authorized Dealer or Service Center. Even if the product warranty is valid, the keycode reset will incur a charge.

Menu operation Page 58

Example: “Options (1)” screen menu for INPUT 1 (RGB) mode

Setting the keycode1Select “System Lock” on the “Op- tions (1)” menu, then press .

•A message is displayed.

•Read this message, and press .

2Press the 4 buttons on the remote control or on the projector to enter the preset keycode in “Old Code”.

•When setting the keycode for the first time, press " on the projector for four times.

79