Using the “Options (1)” Menu

You can use the “Options (1)” menu to enhance the usage for the projector.

Displaying Dual Pictures (Pict in Pict)

The Pict in Pict (picture in picture) function allows you to display two pictures on the same screen. You can display the image input from INPUT 4 or 5 as an inset picture overlapping the main picture input from INPUT 1, 2 or 3.

Menu operation Page 56

Example: “Options (1)” screen menu for INPUT 1 (RGB) mode

Note

•You can press on the projector or ,

on the remote control to select the inset picture image.

•You can press ' / " / \ / on the projector or on the remote control to change the location of the inset picture image.

(The inset picture frame will be displayed. To dis-

play the inset picture to the desired position, move

the frame and press on the projector or on the remote control.)

•Inset picture can only be displayed in composite video or S-video signal of NTSC/PAL/SECAM.

•The audio of the inset picture will come out of the projector’s speakers.

•While the “Pict in Pict” function is working, the “FREEZE” function only works for the inset picture.

•The “Pict in Pict” function does not work when the following signals are input to the main picture.

−UXGA/SXGA+/SXGA/WXGA signal

−480I/480P/540P/576I/576P/720P/1035P/1080I signal

−Interlaced RGB signal

−All signals (when “Resize” is set to “Dot by Dot”)

−No signal (or when the resolution or refresh rate (vertical frequency) of the signal is changed)

Setting the Resize Mode

Depending on the input signal, you can select the screen image.

Menu operation Page 58

Example: “Options (1)” screen menu for INPUT 1 (RGB) mode

Selectable Items of Resize Mode

When inputting RGB signal

When inputting DTV/video

signal

 

Normal

Normal

Full

Full

Dot By Dot

Border

Border

Stretch

Stretch

Smart Stretch

 

 

Note

•For details of the Resize mode, see pages 48 and 49.

•You can also press on the remote control to change the resize mode. (See page 48.)

74