Selecting Adjustment Settings

Adjustment settings stored in the projector can be easily accessed.

Menu operation Page 58

Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode

Special Mode Setting

Ordinarily, the type of input signal is detected and the correct resolution mode is automatically se- lected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu may need to be selected to match the computer display mode.

Menu operation Page 58

Example: “Fine Sync” screen menu for INPUT 1 (RGB) mode

Note

•If a memory has not been set, a resolution and frequency setting will not be displayed.

•When selecting a stored adjustment setting with “Select Setting”, you can set the projector in the stored adjustments.

Note

•If your computer displays patterns which repeat every other line (horizontal stripes), flickering may occur which makes the image hard to see.

•See “Checking the Input Signal” on page 70 for information on the currently selected input sig- nal.

69