Eiki EIP-5000 Page, Page, Page, Page, Pages 38, 4. Adjust the angle, 8. Turn the power off, 7. Select the input mode, 5. Adjust the focus and the zoom

4. Adjust the angle

Adjust the projector angle

•Shift the lens horizontally and vertically.

1 Press on the projector or on the

remote control.

2Press ', ", \ or on the projector or the remote control.

•Adjust the projector angle by rotating the adjust- ment feet.

Pages 38, 395. Adjust the focus and the zoom

1 Press	on the projector or		on the remote control to adjust the focus.
2 Press	on the projector or		on the remote control to adjust the zoom.
						Page 40
6. Correcting the image distortion due to the projection angle
1 Press	on the projector or		on the	4 Press	or	to set the position.
remote control.				5 Repeat the same procedure with the positions
2 Press	on the projector or		on the	for the upper right, lower right and lower left
remote control.				of the image.
3 Press ', ", \ or to move the position for				• When the position of the lower left is set, the
the upper left of the image.				correction is made and the display disappears.
						Page 41
7. Select the input mode
Press	on the projector or		on the	" On-screen Display (RGB)
remote control to select the “INPUT 1” mode.
• When pressing		on the projector, input mode switches in order of : INPUT 1 INPUT 2 INPUT 3 .

Pressing on the projector switches between “INPUT 4” and “INPUT 5”.

• When using the remote control, press			/	/	/	/	to switch the input mode.
							Page 45
8. Turn the power off
Press	on the projector or	on the remote control. While the confirmation message is displayed, press
or	again.	" On-screen Display

•You can unplug the power cord even if the projector is operating.

•Even if you unplug the power cord from the AC outlet, the cooling fan continues to run for a while.

Page 37

21