Manuals / Brands / TV and Video / Projection Television / Eiki / TV and Video / Projection Television

Eiki EIP-5000 Removing and Installing the Lamp Unit, 2Disconnect the power cord, 3 Remove the lamp unit cover

1 109

Download 109 pages, 8.12 Mb

Removing and Installing the Lamp Unit

Info

•Make sure that you remove the lamp unit by the handle. Do not touch the glass sur- face of the lamp unit or the inside of the projector.

•To avoid injury to yourself and damage to the lamp, make sure you carefully follow the steps below.

•Do not loosen other screws except for the lamp unit cover and lamp unit.

(Only the silver screws are loosened.)

1Press on the projector or on the remote control to put the projector into standby mode.

•Wait until the cooling fan stops.

Warning!

•Do not remove the lamp unit from the projector right after use. The lamp and parts around the lamp will be very hot and may cause burn or injury.

Lamp unit 1

AH-50001

Optional

accessories

Lamp unit 2

AH-50002

STANDBY-ON button

2Disconnect the power cord.

• Unplug the power cord from the AC socket.

• Leave the lamp until it has fully cooled down (about 1 hour).

3 Remove the lamp unit cover.

•Loosen the user service screw (1) that secures the lamp unit cover. Remove the

lamp unit cover (2).

Power cord

2

1

User service screw

97

Contents

Page IMPORTANT Model No.: Serial No.: Introduction PRODUCT DISPOSAL Caution Concerning Lamp Replacement How to Read This Owner’s Manual Contents Preparing Introduction Quick Start Setup Using Basic Operation Useful Features Reference Appendix How to Access the PDF Owner’s Manuals SETUP MANUAL IMPORTANT SAFEGUARDS Ensure that you read the following safeguards when setting up your projector Caution concerning the lamp unit The projector may be safely tilted to a maximum angle of 9 degrees Caution concerning the setup of the projector Warning about placing the projector in a high position IMPORTANT SAFEGUARDS Do not block the intake and exhaust vents Caution regarding usage of the projector Other connected equipment Using the projector in other countries Accessories Accessories Throw Distance Part Names and Functions Part Names and Functions About the Indicators on the Projector Power indicator Lamp indicators 1 Temperature warning indicator Projector (Side View) Remote Control Using the Remote Control Using the Remote Control Using the Remote Control with a Signal Cable Switching the Remote Control Mode Using the Remote Control as a Wireless Computer Mouse 2 Slide the ADJ./MOUSE switch on the remote con trol to the MOUSE position 3Use the mouse function Quick Start 4. Adjust the angle Pages 38 5. Adjust the focus and the zoom 6. Correcting the image distortion due to the projection angle 7. Select the input mode Setting Up the Projector Standard Setup (Front Projection) Projection from behind the Screen Projection Using a Mirror Ceiling-mountSetup Connections Samples of Cables for Connection Samples of Cables for Connection Connecting to a Computer Connecting to a Computer Connecting with a 5 BNC to 15-pin D-subCable Connecting with a DVI Digital Cable Connecting to Video Equipment Page Connecting to Video Equipment Connecting to RGB Video Equipment with a 5 RCA RGB Cable Connecting to Video Equipment That Has Component Output Terminals Connecting with an S-videoCable or a Composite Video Cable Controlling the Projector by a Computer Connecting to an Amplifier or Other Audio Equipment Turning the Projector On/Off Image Projection on the remote control Using the Adjustment Feet While lifting the projector, rotate the adjustment feet Image Projection Adjusting the Focus Press on the projector or the remote control to adjust the fo- cus Adjusting the Projected Image Size the remote control to adjust the projected image size Correcting Trapezoidal Distortion Selecting the Type of the Correction Press on the projector or on the remote control GEOMETRIC ADJUSTMENT 3Press on the projector or on the remote control 4Press ', ", \ or | to move the position for the upper left of the image 5Press or to set the posi- tion H & V KEYSTONE 2Press ' or " to parallelize the left and right sides of the pro- jected image 3Press \ or | to parallelize the upper and lower sides of the projected image 4Press or to display “IM AGE RESIZING” Page Switching the Input Mode Press , , , or on the remote control to select the input mode Adjusting the Volume Press\ /| on the projector or on the remote control to adjust the volume Turning Off the Sound Temporarily Press on the remote control to temporarily turn off the sound Displaying an Enlarged Portion of an Image Freezing a Moving Image Resize Mode Page Displaying the Black Screen 2 Pressing again will turn the projected image back on Displaying and Setting the Break Timer 1Press 2While “” is displayed, press ', ", \ or | to set the break timer Menu Items Menu Items Page Page Page Using the Menu Screen 3Press ' or " to select the item you want to adjust To adjust the projected image while viewing it 4Press \ or | to adjust the item selected 5Press Using the Menu Screen Menu Selections (Settings) Press \ or | to display the other menu items 3Press ' or " to select the item you want to set Press | to shift the cursor to the sub menu Press ' or " to select the setting of the item displayed in the sub menu 7Press Picture Adjustment (“Picture” menu) Adjusting the Color Temperature Emphasizing the Contrast Picture Adjustment (“Picture” menu) Selecting the Progressive Mode Reducing Image Noise (DNR) Signal Type Setting Color Management System (“C. M. S.” menu) Setting the Brightness of the Target Color Setting the Chromatic Value of the Target Color Color Management System (“C. M. S.” menu) Setting the Hue of the Target Color Resetting User-definedColor Settings Overview of All Color Settings Computer Image Adjustment (“Fine Sync” menu) Selecting Adjustment Settings Special Mode Setting Computer Image Adjustment (“Fine Sync” menu) Checking the Input Signal Auto Sync Adjustment Auto Sync Display Function Audio Adjustment (“Audio” menu) Speaker Setting Using the “Options (1)” Menu Shifting the Projected Image Vertically (Digital Shift) Setting On-screenDisplay Using the “Options (1)” Menu Setting the Video System Capturing Projected Images Selecting the Background Image Selecting the Startup Image Eco Mode Detecting the Input Signals Automatically Auto Power Off Function System Lock Function Setting the keycode 1Select “System Lock” on the “Op- tions (1)” menu, then press | 4Enter the same keycode in “Recon- firm” Changing the keycode 3Enter the same keycode in “Recon- firm” When the system lock is set 1Press on the remote control or on the projector to turn on the projector Helpful Functions Set during Installation (“Options (2)” menu) Setting a Password Changing the password 1Press ', " and | to enter the password in “Old Password” and press Checking the Lamp Life Status Setting the Lamp Mode Helpful Functions Set during Installation (“Options (2)” menu) Reversing/Inverting Projected Images Controlling Multiple Projectors with the One Remote Control Shortcut to Make Projector Stack Settings 1Select “Pair Stack” on the “Option (2)” menu, and then press 2Select “OK”, and then press Locking the Operation Buttons on the Projector Bypassing Unused Input Selections Selecting the Fan Mode Direct Power On Function Selecting the Transmission Speed (RS-232C) Monitor Output Settings LAN/RS232C Setting DHCP Client Setting TCP/IP Setting 1Select “TCP/IP”, then press 2Enter “IP Address” using ', ", | and \, then press 3Enter “Subnet Mask” using ', ", | and \, then press Service Mode Returning to the Default Settings Overview of All Menu Settings Maintenance Maintenance Indicators Page Regarding the Lamp Removing and Installing the Lamp Unit 2Disconnect the power cord 3 Remove the lamp unit cover Regarding the Lamp 4Remove the lamp unit 5Insert the new lamp unit 6Replace the lamp unit cover Resetting the Lamp Timer 1Connect the power cord 2Reset the lamp timer Computer Compatibility Chart Page Troubleshooting Page Specifications Glossary Index U.S.A Canada Deutschland & Österreich Eastern Europe China