Eiki EIP-5000 Press, Image Projection, GEOMETRIC ADJUSTMENT, 5Press or to set the posi- tion, 3Press on the projector or on the remote control

Image Projection

GEOMETRIC ADJUSTMENT

1Press on the projector or on the remote control re- peatedly until “GEOMETRIC ADJUSTMENT” is displayed.

2Press the buttons below to ad- just the position, size or focus of the projected image.

•Match screen’s four sides to green test pattern.

•Pressing ', ", \ or on the projector

or on the remote control allows you to shift the lens.

•Pressing on the projector or on the remote control allows you to adjust

the projected image size.

•Pressing on the projector oron the remote control allows you to adjust the

focus.

3Press on the projector or on the remote control.4Press ', ", \ or to move the position for the upper left of the image.

•Move the upper left of the yellow frame onto the upper left of the screen.

5Press or to set the posi- tion.

6Repeat the same procedure with the positions for the upper right, lower right and lower left of the image.

•At this time, pressing on the pro-

jector or on the remote control returns to the previous screen.

•Before correcting the upper left of the

image, pressing or returns to the reset confirmation screen.

•When the position of the lower left is set, the correction is made and the

42 display disappears.

▼On-screen Display

Geometric Adjustment

Upper Left Upper Right Lower Right

Lower Left