Eiki EIP-5000 Connecting to Video Equipment That Has Component Output Terminals

Connecting to Video Equipment That Has Component Output Terminals

When connecting the video equipment that has component output terminals to the INPUT 2 terminals, use the BNC to RCA adaptors (commercially available).

Video Equipment Side view

To component video output terminals

Y(green)

PB(CB)(blue)

PR(CR)(red)

To audio output

To INPUT 2 terminals

(R(PR)/G/G sync (Y)/B (PB))

BNC to RCA adaptors (commercially available)

Component video cable

To AUDIO input (2, 3) terminal

terminals

(commercially available)

ø3.5 mm stereo minijack to RCA audio cable (commercially available)

Note

•ø3.5 mm stereo minijack to RCA audio cable (commercially available) is required for audio input.

•Select “480P/525P” or “576P/625P” for “Special Modes” on the “Fine Sync” menu, if necessary. (See page 69.)

•When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com- mercially available cable that fits in the projector terminal you want to connect.

•The projector does not support RGBC signals via the Euro-scart.

33