Eiki EIP-5000 Using the Adjustment Feet, 1 Press, on the projector or, on the remote control, While lifting the projector, rotate the adjustment feet

1 Press	on the projector or
on the remote control.
• Pressing	on the projector or

H & V LENS SHIFT button

on the remote control displays the test

pattern. Checking the test pattern is use-

ful for more accurate adjustment.

▼On-screen Display

H & V LENS SHIFT button

Mouse/adjustment

button

('/"/\/)

ENTER button

Adjustment button ('/"/\/)

ENTER button

2 Press ', ", \ or on the projector or the remote control to adjust the image position.

Using the Adjustment Feet

•When the position of the projected image cannot be adjusted with the lens shift function, use the adjustment feet to adjust the projected angle.

•The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the projector, the screen is inclined or when the installation site is slightly inclined.

•Install the projector so that it is as perpendicular to the screen as possible.

1

2

While lifting the projector, rotate the adjustment feet.

•The projector is adjustable up to approxi-

mately 9 degrees.

Lower the projector, and then rotate the adjustment feet for the fine adjustment.

• When lowering the projector, be careful not to get your fingers caught in the area

between the adjustment feet and theAdjustment feet projector.

Down Up Up Down

39