Eiki EIP-5000 Setting the Lamp Mode, Checking the Lamp Life Status

Checking the Lamp Life Status

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Menu operation Page 56

Example: “Options (2)” screen menu

Description of Lamp Timer (Life)

Lamp usage condition	Remaining lamp life
	100%	5%
Operated exclusively	Approx.	Approx.
while “Eco Mode” is
	2,500 hours*	125 hours*
“ON”.
Operated exclusively	Approx.	Approx.
while “Eco Mode” is
	2,000 hours*	100 hours*
“OFF”.

* This is a reference value and is not guaranteed.

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

•The table above indicates rough estimates in the case of using only in each mode shown.

•The lamp life may vary depending on the usage condition.

Setting the Lamp Mode

This function allows you to select the usage of the two lamps installed in the projector.

Menu operation Page 58

Example: “Options (2)” screen menu

Description of Lamp Mode

Selectable items	Description
Both Lamps	Both lamps are used for greater
	brightness.
Lamp 1 Only	The lamp 1 is used.
	When the lamp 1 burns out, the lamp 2
	automatically switches in use.
Lamp 2 Only	The lamp 2 is used.
	When the lamp 2 burns out, the lamp 1
	automatically switches in use.
Equal Use	Both lamps are used alternately, one
	by one, for certain periods.

83