Eiki EIP-5000 Changing the keycode, Using the “Options (1)” Menu, 4Enter the same keycode in “Recon- firm”, 3Enter the same keycode in “Recon- firm”

Using the “Options (1)” Menu

Note

•If you input a wrong keycode, the cursor returns to the first point of the “Old Code”.

•The preset keycode is 4 " buttons on the projec- tor. If this keycode is set, the keycode input screen does not appear when turning the power on.

3Press the 4 buttons on the remote control or on the projector to enter the new keycode in “New Code”.

Note

•You cannot use the following buttons for keycode:

•STANDBY-ON button

•ENTER button

•L-click button

•R-click/UNDO button

•MENU button

•ZOOM buttons

•FOCUS buttons

•H & V LENS SHIFT button

•System Lock function recognizes each but- ton on the remote control or on the projec- tor as an individual button, even if they share the same button name. If you set the keycode with the buttons on the projector, use only those buttons on the projector. If you set the keycode with the buttons on the remote con- trol, use only those buttons on the remote control.

4Enter the same keycode in “Recon- firm”.

Note

Not displaying the keycode input screen when turning the projector on

•Press " on the projector for four times in steps 2 and 3 above.

When the System Lock is set

•When System Lock is set, the keycode input screen appears after the power is turned on. When it appears, enter the right keycode to start projection. Failure to enter the keycode will cause images not to be projected even when signals are entered to the projector.

Changing the keycode

1Press the 4 buttons on the remote control or on the projector to enter the preset keycode in “Old Code”.

2Press the 4 buttons on the remote control or on the projector to enter the new keycode in “New Code”.

3Enter the same keycode in “Recon- firm”.

80