Switching the Input Mode

Select the appropriate input mode for the connected equipment.

Press , , , or on the remote control to select the input mode.

•When pressing on the projector, the input mode switches in order of :

INPUT 1 INPUT 2 INPUT 3

•When pressing on the projector, the input mode switches between “INPUT 4” and

“INPUT 5”.

Note

•When no signal is received, “NO SIGNAL” will be displayed. When non-supported sig- nal is received, “NOT REG.” is displayed.

•When “Auto Search” of the “Options (1)” menu is set to “ON”, the input mode with signal can automatically be detected and displayed. (See page 78.)

•The input mode is not displayed when “OSD Display” of the “Options (1)” menu is set to “Level A” or “Level B”. (See page 75.)

About the Input mode

INPUT 1/ Used for projecting images from

INPUT 2 equipment that sends RGB signals

(RGB/ or component signals connected to component) the INPUT 1 or 2 terminals.

INPUT 3 Used for projecting images (digital PC from equipment connected to RGB/digital the INPUT 3 terminal.

PC compo- nent/digital video RGB/ digital video component)

INPUT 4 Used for projecting images

(video) from equipment connected to the INPUT 4 terminal.

INPUT 5 Used for projecting images (S-video) from equipment connected to

the INPUT 5 terminal.

// / /

INPUT buttons

"On-screen Display of Input Mode (Example)

When pressing .

INPUT 1/2/3 mode

Using RGB

*The “INPUT 3” display is an example. (When “Signal Type” is set to “D. PC RGB”)

Using component

*The “INPUT 3” display is an example. (When “Signal Type” is set to “D. PC Comp.”)

When pressing .

INPUT 4 mode

Using video

INPUT 5 mode

Using S-video

When “Auto Search” is set to “ON”

•Pressing or once displays the current input mode.

•Pressing or again starts the automatic input search.

45