Connecting to a ComputerConnecting with a 5 BNC to 15-pin D-sub Cable

The projector employs a 5 BNC computer input to prevent deterioration of image quality. When connecting the input terminals on the projector to the computer directly, Connect the

R(PR), G/G sync (Y), B (PB), HD/C sync and VD cables of the 5 BNC to 15-pin D-sub cable (commercially available) to the INPUT 2 terminals on the projector.

Computer

Side view

 

To RGB output

To INPUT 2 terminals

To AUDIO input

 

(2, 3) terminal

 

 

 

terminal

 

 

 

 

To audio output

 

5 BNC to 15-pin D-sub cable

 

 

(commercially available)

 

terminal

 

 

 

 

 

ø3.5 mm stereo or mono audio cable (commercially available)

Note

•When connecting the projector to a compatible computer other than a PC (VGA/SVGA/XGA/SXGA/UXGA) or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information.

•When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable.

•The HD/C sync terminal is only for TTL signal.

28