41 electrolux how the air conditioner works
how the air conditioner works electrolux 42
DRY operation
The dry mode will automatically select the drying operation based on the difference between the set temperature and the actual room temperature.
The temperature is regulated while dehumidifying by repeating turning on and off of the cooling operation or fan only. The fan speed is LOW.
1.Push the MODE button to select DRY.
2.Push the TEMP button to set the desired temperature from 21ºC to 28ºC.
3.Push the ON/OFF button, the operation lamp lights and the air conditioner start to operate in the DRY mode. FAN SPEED is Low. Push the ON/OFF button again to stop this unit operation.
Air flow direction adjustment
Due to the difference of the set temperature of the unit and the actual indoor temperature, the Air Conditioner when in DRY mode will automatically operate many times without running the COOL and FAN mode.
|
|
| l |
| l | y |
|
|
| l |
| l | y |
|
|
| l |
| o | o | o | n |
|
| o | o | o | n |
|
| o | o | |||
C |
|
| n |
|
| C |
|
| n |
|
| C |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
| F |
|
|
|
|
|
| F |
|
|
|
|
|
|
Room temperature
Time
Set temperature
DRY Function
SLEEP mode
Press the sleep button to activate the sleep mode. To deactivate, press the button again.
Cool only mode:
•The indoor unit fan operates at a low velocity.
•After and hour of operation, the adjusted temperature will increase 1º C. After, the unit keeps operating 2ºC above the adjusted temperature.
In heating mode (some models):
•The indoor unit fan operates at a low velocity.
•After and hour of operation, the adjusted temperature will decrease 1º C. After, the unit keeps operating 2º C below the adjusted temperature.
Sleep function is only availaible in the Cool/Heat and AUTO mode.
|
|
|
|
|
|
|
|
|
| temperature |
|
| 1°C |
|
|
| |
Set | 1 hour |
|
|
|
|
|
| |
| 1 hour | 1°C | ||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SLEEP FUNCTION (Cooling mode)
Set | temperature |
|
|
|
|
|
|
|
|
|
|
|
| 1°C |
|
|
|
| |||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1°C |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
| 1 hour |
| 1 hour |
|
| 7 hours |
| ||
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
Use SWING to adjust the airflow direction up and down.
1.When swing is pressed the horizontal louver moves up and down automatically. Press again to stop operation
If the louver oscillates or moves in a position that could affect the cooling or heating of the air conditioner the direction of the oscillation/movement would alter automatically.
SLEEP FUNCTION (Heating mode)
Timer operation
1.Press the TIMER button as required. The current timer setting is displayed alongside either the TIMER ON or TIMER OFF indicator, and will flash.
2. Press or to set the desired time. Each time you push the button, the time moves forward or backward by 10 minutes depending on which direction you press. The time alters as quickly as you press the button.
3.After setting the timer for TIMER ON and TIMER OFF, check the TIMER indicator on the display panel of the indoor unit is illuminated.
4.After the timer has been set, there will be a half a second delay before the remote control sends the signal to the air conditioner. Approximately 2
