Microprocessor Control
6.2Main Menu <Menu>
Press the MENU key to display the Main Menu. The menu selections (in the following order) include:
•SETPOINTS
•STATUS
•ACTIVE ALARMS
•TIME
•DATE
•SETBACK
•SETUP OPERATION
•SET PASSWORD
•SETUP PASSWORD
•CALIBRATE SENSOR
•ALARM ENABLE
•ALARM TIME DELAY
•COM ALARM ENABLE
•CUSTOM ALARMS
•CUSTOM TEXT
•DIAGNOSTICS
•END OF MENU
Use the UP and DOWN arrows to scroll through the selections; when ready to select a particular function press Enter.
6.3Setpoints
Setpoints and system setup parameters are kept in nonvolatile memory. Selecting SETPOINTS from the Main Menu will display the following selections:
•TEMPERATURE SETPOINT
•TEMPERATURE SENSITIVITY
•HUMIDITY SETPOINT
•HUMIDITY SENSITIVITY
•HIGH TEMPERATURE ALARM
•LOW TEMPERATURE ALARM
•HIGH HUMIDITY ALARM
•LOW HUMIDITY ALARM
Scroll through this
1.Press Menu key to display main menu.
2.Scroll to “SETPOINTS” using the Up and Down arrows. Press Enter.
3.Scroll to “TEMP SETPOINT” using the Up and Down arrows. Press Enter.
4.Use the Up and Down arrows to change the value. Press Enter.
Liebert® | 40 |