Emerson MINI-MATE2 user manual Maintenance Inspection Checklist

Maintenance Inspection Checklist

10.0MAINTENANCE INSPECTION CHECKLIST

Liebert Mini-Mate2

Date:____________________________________	Prepared By:____________________________________
Model #:_________________________________	Serial Number:__________________________________

NOTE

Reheat element sheaths and fins are manufactured with stainless steel. Regular inspections are necessary to assure proper cleanliness of the reheating element. Should inspection reveal corrosion particles on the reheating element or adjoining surfaces (including ducts and plenums), appropriate cleaning should be performed. Periodic reheating element replacement may be required to meet specific application requirements.

Monthly

Filters

___ 1. Check for restricted airflow

___ 2. Check for filter

___ 3. Wipe section clean

Fan Section

___ 1. Impellers free of debris and move freely

___ 2. Bearings in good condition

___ 3. Check belt tension and condition

Semiannually

Compressor Section

___ 1. Signs of oil leaks

___ 2. Vibration isolation

Refrigeration Cycle

___ 1. Suction pressure

___ 2. Head pressure

___ 3. Superheat

___ 4. Evaporator coil clean

___ 5. Insulation intact

Air-Cooled Condensing Unit (if applicable)

___ 1. Condenser coil clean

___ 2. Motor mount tight

___ 3. Refrigerant lines properly supported

Humidifier

___ 1. Check canister for mineral deposits

___ 2. Check condition of electrodes

___ 3. All hoses and fittings tight

___ 4. Check water make-up valve for leaks

Drain lines

___ 1. Check for obstructions and sediment buildup.

___ 2. Check for damage and/or corrosion.

___ 3. Check for leaks

Flood Back Head Pressure Control

___ 1. Check refrigerant level

Water- or Glycol-Cooled Condensing Unit

___ 1. Water valve adjustment

___ 2. Water flow

___ 3. Water leaks

Glycol Pump (if applicable)

___ 1.	Glycol leaks
___ 2.	Pump operation
___ 3.	Glycol solution
___ 4.	pH level

Electric Panel

___ 1. Check electrical connections

___ 2. Operational sequence

Electric Reheat

1. Check element for corrosion

Signature:________________________________________________________________

Make photocopies of this form for your records

63 Liebert® Mini-Mate2™