Configuring Microsoft Windows XP | EnGenius Technologies ENH500

6.In the properties dialog box, click Use the following IP address: to configure your

computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the ENH500, and the default gateway which is the ENH500’s IP address, 192.168.1.1. Note: the subnet mask must match that of the ENH500 and the IP address must be on that subnet.

7.Click the OK button to save your changes and close the dialog box.

8.Click the OK button again to save your changes.

4.3 Configuring Microsoft Windows XP

Use the following procedure to configure a computer running Microsoft Windows XP with the default Windows interface.

Image 21

EnGenius Technologies ENH500 user manual Configuring Microsoft Windows XP

Contents

Wireless Access Point / Client Bridge Table of Contents LAN Setup Appendix B Specifications Appendix C Glossary Before you start About This Document Difficult-to-wire environments FeaturesAbility to access real-time information Product Overview Wired LAN backup Wireless extensions of Ethernet networksFrequently altered environments Training and educational facilities Benefits Package Contents System RequirementHardware Overview LED Understanding the ENH500 LEDs Installation Pre-installation GuidelinesInstalling the ENH500 This completes the installation procedure Wireless Network Modes Access Point Mode Access Point with WDS Function Mode Client Bridge Mode WDS Bridge Mode Client Router Mode Page Configuring Microsoft Windows Configuring Your Computer for TCP/IPPage Configuring Microsoft Windows Vista Configuring Microsoft Windows XP Click the Network Connections icon Configuring Apple Mac OS Logging into the ENH500 Username and Password Save / Load Status Main System Log Wireless Client List Dhcp Client Table Connection Status System Switching the Operation Mode Wireless Settings Wireless Configuration Channel HT Mode Wireless ModeAccept / Cancel Extension Channel Save / Cancel Wireless SecuritySuppressed Ssid Station Separation Site Survey Prefer BssidWDS Client Refresh Profile Wireless mode supports 802.11a/n mixed modes. It is Mode MAC Address Filled in if an AP in the Site Survey is selected Profile 1 WEP Wireless Security Settings WPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA 6 WPA2 WPA Mixed Wireless Advanced Settings Wireless Traffic AggregationShaping ACL Mode Wireless MAC FilterMAC Address Filter Add WDS Link Settings IP Settings LAN Setup Spanning Tree Settings Router Settings WAN SettingsStatic IP Type Internet ConnectionAccount Name Domain Name Internet Connection Type Dhcp Dynamic IPGet Automatically From Use These DNS Servers Secondary DNS servers manually PPPoE Point-to-Point Protocol over Ethernet Specify the Maximum Transmit Unit size. EnGenius recommendsThat it remains in Auto Keep Alive Connect on DemandGet Automatically From ISP Pptp Point-to-Point Tunneling Protocol Username Pptp Server LAN Settings Router Mode VPN Pass Through Port Forwarding DMZ DMZ HostingDMZ Address Administration Management Settings Save / Apply / Cancel Management VlanPort Snmp Settings Firmware Upgrade Backup/Restore Settings Time Settings 10.7 Log Save/Apply / CancelSyslog Log Server IP Address Diagnostics Access Point Network Configuration Examples Properties Select Operation Mode to Client Bridge from System WDS Bridge Change your Local Area Network setting to Obtain an IP Select Operation Mode to Client Router from SystemInternet Service Provider on the WAN Settings Address Automatically Appendix a Troubleshooting To Factory Default in the ManagementQuestion Answer Contacting Technical Support Appendix B Specifications Channel Tx Avg. Power Optimal dBmRx Sensitivity Optimal dBm Environment & Mechanical Appendix C Glossary Access Point ESS ID Passphrase Simple Network Management Protocol Snmp WPA2 Federal Communication Commission Interference Statement Appendix D Statements of Conformity Industry Canada Statement Europe Declaration of Conformity 0560 Slovensky Slovak Suomi Finnish