EnGenius Technologies ENH500 Select Operation Mode to Client Bridge from System, Properties

11.2 Client Bridge Mode

Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP Router to join the network.

192.168.1.10

Client

192.168.1.1

ENH500

192.168.1.2

Access Point / Wireless Router

Internet

Please refer to the last section to check the Access Point’s configuration.

Client Bridge

Step 1	Login to the web-based configuration interface with the default
	IP: 192.168.1.1
Step 2	Select your country or region’s regulation.
Step 3	Select Operation Mode to Client Bridge from System
	Properties.
Step 4	Use site survey to scan channels of the nearby area.
Step 5	Select the AP that you would like to associate with.
Step 6	Setup the authentication settings that match to the Access Point’s
	settings.
Step 7	Select Apply to process all of the configurations.

The Client-Bridge’s IP settings must match the Access Point’s settings.