EnGenius Technologies ENH500 user manual Snmp Settings

10.3 SNMP Settings

Click on the SNMP Settings link under the Management menu. This is a networking management protocol used to monitor network-attached devices. SNMP allows messages [called protocol data units] to be sent to various parts of a network. Upon receiving these messages, SNMP-compatible devices [called agents] return data stored in their Management Information Databases.

SNMP Enable/Disable	Select the Radio button to Enable or Disable SNMP function.
Contact	Specify the contact details of the device.
Location	Specify the location of the device.
Community Name	Specify the password for access the SNMP community for read
	only access.
Community Name	Specify the password for access the SNMP community for read
	and write access.
Trap Destination IP	Specify the IP address that will receive the SNMP trap.
Address
Trap Destination	Specify the password of the SNMP trap community.
Community Name
Save / Apply / Cancel	Press Save / Apply to confirm the changes or Cancel to return
	previous settings.

Accept does not apply the changes – you must go to Status -> Save / Load to apply the new settings. Please refer to Chapter 4.1 for more information.