Wireless MAC Filter, ACL Mode, Add | EnGenius Technologies ENH500

7.4 Wireless MAC Filter

Wireless MAC Filter is used to Allow or Deny wireless clients, by their MAC addresses, from accessing the network. You can manually add a MAC address to restrict the access permission’s of the client. The default setting is Disable Wireless MAC Filters.

0.

ACL Mode	ACL Mode can deny or allow specific clients to access the
	network. Select Disable, Deny MAC in the list, or Allow MAC in
	the list from the drop down list.
MAC Address Filter	Specify the MAC address, manually.
Add	Press Add to add the MAC address in the table.
Apply	Press Apply to apply the changes.

Image 48

EnGenius Technologies ENH500 user manual Wireless MAC Filter, ACL Mode, MAC Address Filter, Apply

Contents

Wireless Access Point / Client Bridge Table of Contents LAN Setup Appendix B Specifications Appendix C Glossary About This Document Before you start Features Difficult-to-wire environmentsAbility to access real-time information Product Overview Wireless extensions of Ethernet networks Wired LAN backupFrequently altered environments Training and educational facilities Benefits Package Contents System RequirementHardware Overview Understanding the ENH500 LEDs LED Installation Pre-installation GuidelinesInstalling the ENH500 Wireless Network Modes Access Point Mode This completes the installation procedure Access Point with WDS Function Mode Client Bridge Mode WDS Bridge Mode Client Router Mode Page Configuring Your Computer for TCP/IP Configuring Microsoft WindowsPage Configuring Microsoft Windows Vista Configuring Microsoft Windows XP Configuring Apple Mac OS Click the Network Connections icon Logging into the ENH500 Username and Password Status Save / Load Main Wireless Client List System Log Connection Status Dhcp Client Table System Switching the Operation Mode Wireless Configuration Wireless Settings Wireless Mode Channel HT ModeAccept / Cancel Extension Channel Wireless Security Save / CancelSuppressed Ssid Station Separation Site Survey Prefer BssidWDS Client Profile Refresh Wireless mode supports 802.11a/n mixed modes. It is MAC Address Mode Filled in if an AP in the Site Survey is selected Profile Wireless Security Settings 1 WEP WPA-PSK 3 WPA2-PSK WPA-PSK Mixed 5 WPA 6 WPA2 WPA Mixed Wireless Advanced Settings Wireless Traffic AggregationShaping Wireless MAC Filter ACL ModeMAC Address Filter Add WDS Link Settings LAN Setup IP Settings Spanning Tree Settings Router Settings WAN SettingsStatic IP Internet Connection TypeAccount Name Domain Name Dhcp Dynamic IP Internet Connection TypeGet Automatically From Use These DNS Servers Secondary DNS servers manually PPPoE Point-to-Point Protocol over Ethernet Specify the Maximum Transmit Unit size. EnGenius recommendsThat it remains in Auto Connect on Demand Keep AliveGet Automatically From ISP Pptp Point-to-Point Tunneling Protocol Pptp Server Username LAN Settings Router Mode VPN Pass Through Port Forwarding DMZ DMZ HostingDMZ Address Management Settings Administration Save / Apply / Cancel Management VlanPort Snmp Settings Backup/Restore Settings Firmware Upgrade Time Settings Save/Apply / Cancel 10.7 LogSyslog Log Server IP Address Diagnostics Network Configuration Examples Access Point Select Operation Mode to Client Bridge from System Properties WDS Bridge Select Operation Mode to Client Router from System Change your Local Area Network setting to Obtain an IPInternet Service Provider on the WAN Settings Address Automatically Appendix a Troubleshooting To Factory Default in the ManagementQuestion Answer Contacting Technical Support Appendix B Specifications Channel Tx Avg. Power Optimal dBmRx Sensitivity Optimal dBm Environment & Mechanical Access Point Appendix C Glossary ESS ID Passphrase Simple Network Management Protocol Snmp WPA2 Appendix D Statements of Conformity Federal Communication Commission Interference Statement Industry Canada Statement Europe Declaration of Conformity 0560 Slovensky Slovak Suomi Finnish