3.In the Networking tab, click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
4.In the properties dialog box, click Use the following IP address: to configure your
computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the ENH500, and the default gateway which is the ENH500’s IP address, 192.168.1.1. Note: the subnet mask must match that of the ENH500 and the IP address must be on that subnet.
5.Click the OK button to save your changes and close the dialog box.
6.Click the OK button again to save your changes.
