EnGenius Technologies ENH500 user manual Management Vlan, Port, Save / Apply / Cancel

Port	if you specify the Port number is 8080, then you will need to enter
	the following http://IP address:8080 to access the web interface.
Save / Apply / Cancel	Press Save / Apply to confirm the changes or Cancel to return
	previous settings.

Pressing Save / Apply will change the settings immediately. It is not reversible unless the settings are changed again or the device is reset.

10.2 Management VLAN

Click on the Management VLAN link under the Management menu. This option allows you to assign a VLAN tag to packets. A VLAN is a group of computers on a network whose software has been configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on a VLAN do not have to be physically located next to one another on the LAN.

Management VLAN ID If your network includes VLANs and if tagged packets need to pass through the Access Point, specify the VLAN ID in this field. If not, select the No VLAN tag radio button.

Accept / Cancel Press Accept to confirm the changes or Cancel to return previous settings.

Please make note of the following:

1.Accept does not apply the changes – you must go to Status -> Save / Load to apply the new settings. Please refer to Chapter 4.1 for more information.

2.If you reconfigure the Management VLAN ID, you may lose connection to the ENH500. Verify the DHCP server can support the reconfigured VLAN ID, and then re-connect to the new IP address.