6 System
6.1 Switching the Operation Mode
The ENH500 supports 4 modes: Access Point, Client Bridge, WDS Bridge, and Client Router. In order to switch between the operating modes, please go to System
To begin, click System Properties under System Section.
∙Device Name: Specify a name for the device. It is not the broadcast SSID; this will be shown in SNMP management.
∙Country/Region: Select a Country/Region to conform to local regulations.
∙Operation Mode: Select an operation mode via a Radio Button.
Click Accept to confirm the changes.
Accept does not apply the changes – you must go to Status
If you would like to use Access Point with WDS Function mode, please select
Access Point Mode and then enable WDS function in the Wireless Network section. The scenario requiring this functionality, WDS and AP, is rare.
