Removing the Switch from a Rack

Removing the Switch from a Rack

To remove the G‐Series Ethernet switch from a rack:

1.While supporting the switch so it does not fall, carefully remove the mounting screws from the two brackets that attach the switch to the rack.

2.If necessary, remove each bracket from the switch by removing the mounting kit screws as shown in Figure 2‐1 on page 2‐5.

Enterasys G-Series Hardware Installation Guide 3-5

Page 55
Image 55
Enterasys Networks G3G170-24, G3G124P-24, G3G124-24 manual Removing the Switch from a Rack