Enterasys Networks G3G124-24, G3G124P-24, G3G170-24 manual MGBIC-LC05 Specifications 100BASE-FX

1-Gigabit Ethernet and 100Base-FX Transceiver (SFP) Specifications

Table A-15 MGBIC LC04 Operating Range

Item	1310 nm	Range
9 or 10 µm SMF	N/A	2,000 Meters

MGBIC-LC05 Specifications (100BASE-FX)

Table A-16 MGBIC-LC05 Optical Specifications

Item	10 µm SMF
Transmit Power (minimum)	-15 dBm
Receive Sensitivity	-25 dBm
Link Power Budget 1	10 dBm

1.The maximum drive distance (up to 10 km) depends on the quality of the installed single-mode fiber-optic cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment. The Link Power Budget must not exceed those specified in this table.

Table A-17 MGBIC LC05 Operating Range

Item	1310 nm	Range
9 or 10 µm SMF	N/A	10,000 Meters

MGBIC-LC07 Specifications (1000BASE-ELX)

Table A-18 MGBIC-LC07 Optical Specifications

Item

Transmit Power (minimum)	-2 dBm, min.
Receive Sensitivity	-30 dBm, min.
Maximum Input Power	-9 dBm
Link Power Budget1	28 dB
(Full Duplex Only)

1.The maximum drive distance (up to 110 km) depends on the quality of the installed single-mode fiber-optic cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment. The Link Power Budget must not exceed those specified in this table. The MGBIC-LC07 input power must not exceed -9 dBm. Otherwise, saturation could occur.

Table A-19 MGBIC-LC07 Operating Range

Item	1550 nm	Range
9 or 10 µm SMF	N/A	110,000 Meters

Enterasys G-Series Hardware Installation Guide A-9