Safety Notices

Please read through the safety notices before installing the AXIS 1440.

Caution! - must be observed to avoid loss of data or damage to your equipment. Important: - must be observed to avoid operational impairment.

Do not proceed beyond a Caution! or an Important: unless you have taken appropriate measures!

Electromagnetic Compatibility (EMC) notices - USA

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. Shielded cables should be used with this unit to ensure compliance with the Class A limits.

Electromagnetic Compatibility (EMC) notices - Europe

This digital equipment fulfils the requirements for radiated emission according to limit B of EN55022/1994, and the requirements for immunity according to EN50082-1/1992 residential, commercial, and light industry (Compliance is not valid for unshielded network and printer cables).

Liability

Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform us by contacting your local Axis office detailed on the back cover of this manual. AXIS Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

Year 2000 compliance

Axis Communications warrants that the AXIS 1440 with software versions 5.51 or later is Year 2000 compliant.

Axis’ Trademarks

NetPilot, ThinServer.

Other Trademark Acknowledgments

AIX, Apple, CompuServe, DOS, EPSON, EPSON Stylus, EPSON SoundAdvice, EPSON FaxAdvice, Ethernet, EtherTalk, IBM, Internet Explorer, LAN Manager, LAN Server, LANtastic, Macintosh, Microsoft, Netscape, Novell NetWare, OS/2, UNIX, Windows, are registered trademarks of the respective holders.

AXIS 1440 User’s Manual

Revision 1.0

Part No: 16085

Dated: August 1998

Copyright © Axis Communications AB, 1998

 

 

 

AXIS 1440 User’s Manual