Section 3: Installing and Configuring the Print Server

The AXIS 1440 can automatically download a customized config file from a TFTP server. Just add the name of the config file and the TFTP server’s Internet address to your DHCP scope. The config file is downloaded immediately after the AXIS 1440 receives its Internet address.

Note: ❏ You don’t have to restart the AXIS 1440 to download the Internet address.

Using ARP in If you’re running Windows 95, Windows 98 or Windows NT, you Windows 95/98 and can use ARP to set the Internet address.

Windows NT

Follow these steps:

1.Start a DOS window.

2.Type the following commands:

arp -s <Internet address> <Ethernet address> ping <Internet address>

arp -d <Internet address>

Example:

arp -s 192.168.3.191 00-40-8c-10-00-86 ping 192.168.3.191

arp -d 192.168.3.191

The host returns a message similar to the following: Reply from 192.168.3.191.... This indicates that the address has been set and communication is established.

Notes: ❏ When using the Windows 95 implementation of ARP, you must first ping an existing unit on your network before setting the Internet address of your AXIS 1440. (Use arp-a to verify that you have an empty ARP table first.)

26

AXIS 1440 User’s Manual