Section 5: Setting Up Windows Workstations

Using a shared

Follow these steps if you are using a shared printer from a

printer from a

Windows 95 or Windows 98 client:

Windows 95/98 client

1.

Click Start, point to Settings, then click Printers.

 

 

 

2.

Click Add Printer.

 

3.

Select Network Printer, then click Next.

 

4.

Enter the full path for the network printer (for example, //<host

 

 

name>/<printer name>), or click Browse to locate the workstation

 

 

sharing the printer and select the printer.

 

5.

Click Next, then click Finish.

Note:

File and printer sharing must be enabled on the workstation sharing

 

the printer.

Using the

Follow the procedure appropriate to your network protocol to install

AXIS Print Monitor

Axis printer ports from a Windows NT 4.0 workstation:

with

 

 

Windows NT 4.0

 

 

 

 

 

NetBIOS/NetBEUI 1. Click Start, point to Settings, then click Printers.

2.Right-click your EPSON printer icon and click Properties.

3.Click the Ports tab, then click Add Port.

4.Select AXIS Port from the list, and click New Port...

5.Select NetBIOS/NetBEUI as your protocol and click OK.

6.Select the AXIS printer port from the ports list and click OK. The port name appears as <name>.LP1, where <name> is AX followed by the last six digits of the AXIS 1440 serial number, (for example AX560B35). Click Close.

38

AXIS 1440 User’s Manual