Section 3: Installing and Configuring the Print Server

Using RARP in UNIX Follow these steps to set the Internet address using RARP:

1.Append the following line to your Ethernet Address table. This is typically performed using the command /etc/ethers:

<Ethernet address> <host name>

Example

00:40:8c:10:00:86 npsname

2.If necessary, update your host table and alias name databases, as required by your system.

3.If it is not already running, start the RARP daemon. This is typically performed using the command rarpd -a

4.Restart the AXIS 1440 to download the Internet address.

28

AXIS 1440 User’s Manual