Section 7: Setting Up OS/2 Workstations
About AXIS Print | AXIS Print Utility for OS/2 does the following: | ||
Utility for OS/2 | • | Installs and maintains the AXIS 1440 printer port as an OS/2 | |
|
| ||
|
| ||
|
|
| printer port. |
|
| • | Captures and monitors print jobs directed to the AXIS 1440 port, |
|
|
| and notifies you of problems. Print jobs may be directed through |
|
|
| a spool directory either at your local hard disk, or at the file server. |
Note: | ❏ | The NetBEUI protocol must be active. If not, use MPTS/LAPS | |
|
|
| (LAN Server) to activate it. |
Install the AXIS 1440 1. With AXIS Print Utility for OS/2 running, click Install to install your AXIS 1440. The print server appears in the list as <name>.LP1, where <name> is AX followed by the last six digits of your print server number (for example, AX100086.LP1). You can use AXIS NetPilot to change this default name.
2.Select the port that you want to install, then click Install. Repeat this procedure for each server using the AXIS 1440.
Note: ❏ AXIS Print Utility for OS/2 must be running on the server whenever clients print to the AXIS 1440.
50 | AXIS 1440 User’s Manual |