Appendix B: The Parameter List

Appendix B The Parameter List

This appendix provides an overview of the AXIS 1440 parameters.

The Config File The left-hand column of this table shows the parameters and their default values as they appear in the config file, and the right-hand column contains a brief description of each parameter.

After you change them, most parameters take effect for the next print job. If Requires Restart appears in the parameter description, you must restart the AXIS 1440 before a change to that parameter takes effect.

Note: The Root Password parameter (ROOT_PWD) only appears when you’re logged in to the AXIS 1440 using root. It does not print when you press the test button.

--- GENERAL MENU

NODE_ADDR.

:

00 40 8C 10 00 86

Node Address

BASE URL.

: WWW.AXIS.COM

Default Base URL Address

ROOT_PWD.

: pass

 

Root Password

HP_JETADMIN.

: AUTO_SENSE (AUTO_SENSE, YES, NO)

HP JetAdmin Support Enabled

--- TCP/IP MENU

 

 

 

 

 

 

 

 

TCP_ENB.

: YES

 

TCP/IP Protocol Enabled

INT_ADDR.

:

0

0

0 0

Internet Address

DEF_ROUT.

:

0

0

0 0

Default Router Address (0.0.0.0 for no router)

NET_MASK.

:

0

0

0 0

Net Mask (e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)

LPD_BANN.

:

OFF

 

LPD Banner Page Disabled

DHCP_ENB.

:

YES

 

DHCP Protocol Enabled

BOOTP_ENB.

:

YES

 

BOOTP Protocol Enabled

RARP_ENB.

:

YES

 

RARP Protocol Enabled

WINS_ENB.

:

YES

 

WINS Protocol Enabled

WINS_ADDR1.

:

0

0

0 0

Internet Address of the primary WINS server

WINS_ADDR2.

:

0

0

0 0

Internet Address of the secondaryWINS server

NBT_SCOPE_ID.

:

 

 

 

Defines the NetBIOS scope to be used with WINS Name Registration

AXIS 1440 User’s Manual

81