Section 5: Setting Up Windows Workstations

Section 5 Setting Up Windows

Workstations

This section describes how to use the AXIS print utilities for printing in the Windows environment.

If you plan to use the AXIS 1440 in a multiprotocol environment, you need to set it up in each environment in your network. See the relevant sections in this manual:

Section 4 Performing Additional NetWare Setup on page 31

Section 6 Setting Up Macintosh Computers on page 47

Section 7 Setting Up OS/2 Workstations on page 49

Section 8 Setting Up - UNIX on page 53

Setting Up Windows 95, Windows 98, and Windows NT Workstations

If you have a network supporting the NetBIOS/NetBEUI or TCP/IP (LPR) protocols, use AXIS Print Monitor to configure AXIS 1440 printer ports on Windows 95, Windows 98 and Windows NT workstations for peer-to-peer or client-server printing.

Install the utility on each workstation performing peer-to-peer printing, and on server workstations in a client-server environment. (See Software Installation on page 18 for instructions.) AXIS Print Monitor allows users to access any shared network printer as if it were connected directly to their workstations. It also allows users to enable pop-up messages notifying them of error conditions.

You can use AXIS NetPilot or the internal web server to change the print server’s default name or other default parameters. See Section 9 Management and Configuration on page 57.

AXIS 1440 User’s Manual

35