Epson 1440 Hardware Installation, Note:, Caution

Section 3: Installing and Configuring the Print Server

Hardware Installation

Connecting a Printer Follow the instructions below to connect your EPSON printer to the to the AXIS 1440 AXIS 1440 Print Server.

Print Server

Caution! ❏ Make sure that the external power supply you’re using has the correct voltage.

1.Turn the printer off.

2.Connect the AXIS 1440 to your printer’s parallel port.

3. Connect the external power supply to the external power supply connector. The power indicator lights and the network indicator start to flash during the power up and self test routines. The AXIS 1440 is ready to use when the network indicator stops flashing and remains off.

Test the Connection: 1. Turn the printer on.

2. Press and release the test button on the AXIS 1440 to print a test page.

If the test page prints successfully, the AXIS 1440 is connected to the printer.

Note: ❏ The test page includes a list of the most important parameters, as well as the firmware version number.

14 AXIS 1440 User’s Manual