6.Pull the paper set levers all the way forward until the paper guides retract and lock open to allow for paper loading.
7.Take a stack of paper and fan it. Then tap the side and bottom of the paper on a flat surface to even up the stack.
wCaution:
Do not use envelopes, multipart forms, carbon paper, or labels in the
8.Insert up to 50 sheets of paper along the left paper guide.
9.Adjust the position of the right paper guide so that it matches your paper’s width. Make sure the position of the guide allows the paper to move up and down freely.
10.Push the paper set levers back to clamp the paper against the guide rollers.
11.Remove the paper supports from the edge guides. Insert the two stacker supports supplied with the
100Options and Consumables