8.To separate the incoming paper from the printed paper, attach the paper guide by holding it horizontally and fitting its notches over the printer’s mounting posts as shown below. Then slide the paper guide toward the front of the printer until you feel it click.

9.Replace the printer cover and close it.

10.Turn on the printer.

11.When using the push tractor, it is a good idea to turn on the Auto tear off feature in Default Setting mode. See page 67.

12.Press the LF/FF button to feed the paper to the loading position. When the printer receives data, it begins printing automatically.

13.After you finish printing, follow the steps in the next section to tear off your printed document. If the first printed line on your page appears too high or too low, you can change its position using the Micro Adjust feature. See “Adjusting the top-of-form position” on page 22.

cCaution:

Never use the paper feed knob to adjust the top-of-form position; this may damage the printer or cause it to lose the top-of-form position.

The next time you print, the paper automatically feeds back to the loading position.

14Paper Handling