Switching between the
The desired paper type does not load.
Cause | What to do |
|
|
The paper release lever may not be in the proper position.
Pull the lever forward to load continuous paper or push the lever back to load single sheets.
Using the pull tractor with the push tractor, continuous paper does not feed properly
Paper is feeding crooked or jams.
Cause | What to do |
|
|
The pull tractor and push | When using both tractors, make sure |
tractor sprockets are not | that the sprockets on both are positioned |
aligned correctly. | evenly. |
|
|
The paper may have too | Adjust the position of the sprockets to |
much slack. | take up any slack along the width of the |
| paper. Remove slack lengthwise by |
| rotating the paper feed knob. |
The paper may be caught on the edge guides.
Make sure that the paper guide is installed over the paper and that the edge guides are positioned correctly.
Maintenance and Troubleshooting | 89 |